Power Tools
Brand: MILES
MPN: MILSTAP8-14
Miles™ 18 Gauge Brad Nails T14
14 mm Brad Nail
Cat no: MILSTAP8-14
Description
Specification
Type
Galvanised
Gauge
18 Ga
Leg Length
14 mm
Brads Per Strip
50
Box Packing
1000 Brad Nails
WARNING:
Always wear safety goggles when using staplers and sharp tools.
Keep out of reach of children!....
N$ 46.00
Ex VAT:N$ 40.00
Brand: MILES
MPN: MILSTAP9-14
Miles™ 18 Ga Headless Pins 14 mm
14 mm Headless Pin
Cat no: MILSTAP9-14
Description
Specification
Type
Galvanised
Gauge
18 Ga
Leg Length
14 mm
Pins Per Strip
50
Box Packing
1000 Pin Nails
WARNING:
Always wear safety goggles when using staplers and sharp tools.
Keep out of reach of children!....
N$ 40.25
Ex VAT:N$ 35.00
Brand: MPS
MPN: MPS3740
HSS Bimetal Body Saw Blade- 32 TPI - 5 pack
The blade is designed to fit in pneumatic body saws. The blades have a wide application range, high endurance and long life span.
QTY: 5
Material Thickness Range: 0.5-1.0 mm....
N$ 336.78
Ex VAT:N$ 292.85
Brand: MPS
MPN: MPS3744
HSS Bimetal Body Saw Blade- 18 TPI - 5 pack
The blade is designed to fit in pneumatic body saws. The blades have a wide application range, high endurance and long life span.
QTY: 5
Material Thickness Range: 2-2.5mm....
N$ 364.32
Ex VAT:N$ 316.80
Brand: FESTOOL
MPN: FES575077
Festool Compressed air eccentric sander LEX 3 150/7
Order number: FES575077
Model: LEX 3 150/7 ....
N$ 22,676.39
Ex VAT:N$ 19,718.60
Brand: FESTOOL
MPN: FES575081
Festool Compressed air eccentric sander LEX 3 150/5
Order number: FES575081
Model: LEX 3 150/5 ....
N$ 23,609.50
Ex VAT:N$ 20,530.00
Brand: FESTOOL
MPN: FES691131
Festool Compressed air eccentric sander LEX 3 77/2,5
Order number: FES691131
Model: LEX 3 77/2,5 ....
N$ 14,780.00
Ex VAT:N$ 12,852.17
Brand: FESTOOL
MPN: FES691139
Strengths and benefitsLow compressed air consumption ensures high cost savingsLow vibration levels and a pleasant operating noise protect the user's healthSimplifies permanent dust extraction, guarantees the best working results and protects the user's health when combined with the IAS 3 light hoseSanding pad brake reduces sanding errors when setting down the machine, thereby avoiding rework and additional costsHigh-quality FUSION-TEC sanding pad with MULTI-Jetstream principle ensures ..
N$ 15,394.92
Ex VAT:N$ 13,386.89
Brand: AIRCRAFT
MPN: AT0018-02
AirCraft Outer Sleeve for Air Hydraulic Riveter (AT0018-02)
At a Glance: Replacement outer sleeve assembly for AirCraft air hydraulic riveters—supports the front-end mechanism for smooth, controlled riveting.
The AirCraft AT0018-02 Outer Sleeve is a key front-end component for an AirCraft Air Hydraulic Riveter. This sleeve forms part of the nose/front assembly, helping keep internal parts aligned and protected while the tool applies pulling force on rivet mandrels.
If your rivet..
N$ 386.00
Ex VAT:N$ 335.65
Brand: AIRCRAFT
MPN: AT0018-04
AirCraft Jaw Assembly 3 Piece for Air Hydraulic Riveter (AT0018-04)
At a Glance: 3-piece replacement jaw set for AirCraft air hydraulic riveters—grips the mandrel securely for consistent pulling power and clean rivet setting.
The AirCraft AT0018-04 Jaw Assembly is a 3-piece jaw set that forms the gripping heart of an Air Hydraulic Riveter. These jaws bite onto the rivet mandrel and pull it with controlled force to set the rivet properly. Over time, jaw teeth wear, jaws glaze, and gri..
N$ 257.89
Ex VAT:N$ 224.25
Brand: AIRCRAFT
MPN: AT0018-24
AirCraft Air Cylinder Cover for Air Hydraulic Riveter (AT0018-24)
At a Glance: Replacement air cylinder cover components for AirCraft air hydraulic riveters—supports sealing and smooth cycling for consistent riveting performance.
The AirCraft AT0018-24 Air Cylinder Cover is a critical service part for the air cylinder section of an AirCraft Air Hydraulic Riveter. The cylinder cover forms part of the air motor/cylinder assembly, helping to locate internal components, support sealing s..
N$ 417.62
Ex VAT:N$ 363.15
Brand: AIRCRAFT
MPN: AT0018-C02
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C02)
At a Glance: Service wrench for AirCraft air hydraulic riveters—designed to fit riveter fittings and nose components for quick, secure maintenance.
The AirCraft AT0018-C02 Wrench is the correct tool to keep your Air Hydraulic Riveter properly serviced and ready for work. It’s designed to suit key fittings and nose/front-end components, making it easier to tighten, loosen, and maintain parts without slipping, rounding, or damaging..
N$ 33.98
Ex VAT:N$ 29.55